Description

Free USPS First Class Shipping Enabled. 

We ship the same or next day in most cases.

Our iHAS or Instrument Hole Adapter System takes the place of the standard instrument hole block-off plate and makes the empty space on your panel useful again without need for costly permanent mods to your panel.

These parts are designed, tested, 3D printed and assembled in the USA (Indiana) by a fellow pilot from Temperature and UV resistant ASA plastic (higher tech version of ABS) for maximum durability in aircraft that sometimes sit on a ramp in the sun.  ASA plastic can be sanded and painted if an improved finish or color matched part is desired.  Light coats are recommended as common paint solvents can temporarily soften the surface.

• No hassle returns for 30 days:  if you don’t like it, or you broke it, or you ran it over with you car, if it talked back to you…. it doesn’t matter, we take it back, no problem.
• 1 Year standard warranty from the date of purchase for manufacturing or other product defects (if it breaks, melts, or otherwise lets you down in a year…email us and we will make it right).

This listing is for:

• “The ChronoBase” 
  • Mounts in place of a deleted vintage clock found in many older planes:
    • The pilot yoke of Vintage Mooneys
    • Other planes and models have them on the yoke or the instrument panel.
    • See the listing images for the dimensions to verify that your vintage clock is the same size
  • Provides either a 1″ ball mount compatible with the Ram Mount system or an open threaded 1/4-20 hole ready to accepted whatever you would like to mount.
  • The 4 outer holes accept up to a # 8 screw for attachment. (Not included.)
  • The 4 inner holes are #10-32 for component attachment. (Included)
  • Available in 3 colors Black, White, and Grey.
• This listing has two configuration options, each with 3 colors:
  1. The ChronoBase only (no ball mount)
  2. The ChronoBase with the 1″ ball mount already attached and thread locked.

 

 

I’ve flown just like this with a full iphad for 4 years. (See my Youtube Videos):

 

 

 

 

Other available iHAS products (See our Separate Listings):

• “The BaseStation Only” 
  • Already have an RAM^® AMPS compatible device and just want to put it on your panel? Then this is all you’ll need.
  • Uses the standard 3 1/8″ instrument mounting pattern so it can directly replace a deleted instrument.
• “The DrinkDock System”
  • Mounts a cupholder and Apple Pencil holder in place of a deleted 3 1/8″ gage.
  • Includes “The Basestation” so no need to buy it separately.
  • Both the cupholder and mounting plate use the RAM^® ball mount AMPS pattern and so can interface with that system. 
• “The Hutch System”
  • Mounts a storage box and Apple Pencil holder in place of a deleted 3 1/8″ gage.
  • Includes “The Basestation” so no need to buy it separately
  • Both the storage box and mounting plate use the RAM^® ball mount AMPS pattern and so can interface with that system. 
• “The Hanger System”
  • Mounts a headphone hanger in place of a deleted 3 1/8” instrument.
  • Comes preassembled and ready to install as once unit.

Disclaimer: Installation should be performed by a qualified and approved mechanic.  Great care should be taken to ensure that the installation will not interfere with the safe operation of the aircraft including controls interference during all stages of operation including situations where the item being mounted or stored shifts or falls, or the device itself fails.  As the regulations for aircraft systems modification is very complex, and maintenance varies greatly from country to country, SkyMount and Laplace LLC make no claim of knowledge towards the legal installation of any of these components in any situation.  Please work with your local trusted experts to determine if you can use these products and how best to install them.  The installation pictures provided serve as illustrations only and are not intended as examples of safe and legal application.